Inconel 600 may be a nickel-chromium alloy used for applications that need corrosion and warm temperature resistance. This nickel-base alloy was designed for service temperatures from refrigerant to elevated temperatures within the vary of 2000° F. it's non-magnetic, has glorious mechanical...
Inconel 600 may be a nickel-chromium alloy used for applications that need corrosion and warm temperature resistance. This nickel-base alloy was designed for service temperatures from refrigerant to elevated temperatures within the vary of 2000° F. it's non-magnetic, has glorious mechanical properties, and presents the fascinating combination of high strength and smart weldability beneath a large vary of temperatures. The high nickel content in alloy 600 permits it to retain considerable resistance beneath reducing conditions, makes it immune to corrosion by variety of organic and inorganic compounds, provides it glorious resistance to chloride-ion stress-corrosion cracking and additionally provides glorious resistance to base-forming solutions. Typical applications of this nickel-base alloy embody the chemical, pulp and paper, aerospace, applied science and warmth treating industries.
Fabrication with alloy 600
Alloy 600 is each hot shaped and cold shaped victimization typical processes. Hot operating ought to be performed between 1600° F and 2250° F avoiding any work between1200-1600° F as a result of the malleability decreases during this temperature vary. attachment Alloy 600 is achieved via protected metal-arc attachment, TIG, and MIG.
Chemical Composition, %
|Ni + Co||Cr||Fe||C||Mn||S||Si||Cu|
|72.0 min||14.0-17.0||6.0-10.0||.15 max||1.00 max||.015 max||.50 max||.50 max|
|Pipe Smls||Pipe Welded||Tube Smls||Tube Welded||Sheet/Plate||Bar||Forging||Fitting||Wire|
Typical room temperature Tensile Properties of Annealed Material
|Product Form||Condition||Tensile (ksi)||.2% Yield (ksi)||Elongation (%)||Hardness (HRB)|
|Rod & Bar||Cold-Drawn||80-100||25-50||35-55||65-85|
|Rod & Bar||Hot-Finished||80-100||30-50||35-55||65-85|
|Tube & Pipe||Hot-Finished||75-100||25-50||35*55||-|
|Tube & Pipe||Cold-Drawn||80-100||25-50||35-55||88 Max|