Home > Knowledge > Content

Product Categories

Add: Aerospace Industry Park, Danyang City, Jiangsu Province, China
M.B: +86-18006107688
TEL: +86-511-86456007
E-mail: info@hltegang.com
Knowledge about INCONEL 718
Aug 15, 2018

Inconel 718 may be a Gamma Prime strong alloy with wonderful mechanical properties at elevated temperatures, moreover as refrigerant temperatures. appropriate for temperatures upto around 1300 F. are often pronto worked and age hardened.

Excellent strength from -423 degrees F to 1300 degrees F (-253 degrees C to 705 degrees C). Age hardenable and will be welded in totally aged condition, wonderful oxidization resistance up to 1800 degrees F (980 degrees C). usually oversubscribed within the resolution toughened temper, however are often ordered aged, cold worked, or cold worked & aged.



Uses for metal 718 tend to be within the field of turbine parts and refrigerant storage tanks. Jet engines, pump bodies and components, rocket motors and thrust reversers, fuel part spacers, hot extrusion tooling. different common uses ar high strength bolting, and down hole shafting.




Nickel & atomic number 27 base corrosion, temperature and wear-resistant alloys, admire alloy 718, ar classified as moderate to tough once machining, however, it ought to be stressed that these alloys may be machined mistreatment standard production strategies at satisfactory rates. throughout machining these alloys work harden speedily, generate high heat throughout cutting, weld to the cutter surface and provide high resistance to metal removal attributable to their high shear strengths. the subsequent ar key points that ought to be thought-about throughout machining operations:

CAPACITY - Machine ought to be rigid and swamped the maximum amount as potential.

RIGIDITY - Work piece and power ought to be control rigid. Minimize tool overhang.

TOOL SHARPNESS - ensure tools ar sharp the least bit times. amendment to sharpened tools at regular intervals instead of out inevitably. A 0.015 in. wear land is taken into account a boring tool.

TOOLS - Use positive rake angle tools for many machining operations. Negative rake angle tools may be thought-about for intermittent cuts and significant stock removal. Carbide-tipped tools ar steered for many applications. High speed tools may be used, with lower production rates, and ar usually counseled for intermittent cuts.

POSITIVE CUTS - Use significant, constant, feeds to take care of positive cutting action. If feed slows and therefore the tool dwells within the cut, work hardening happens, tool life deteriorates and shut tolerances ar not possible.

LUBRICATION - lubricants ar fascinating, soluble oils ar counseled particularly once mistreatment inorganic compound tooling.


You may find us in following ways:

You may find us in following ways:


E-mail: info@hltegang.com

Quick Navigation
  • About Us
  • Product
  • News
  • Knowledge
  • Contact Us
  • Feedback
  • Newsletter
    Enter in your email address to receive deals and coupons.
    +86-511-86456007 info@hltegang.com